Engineering Services

Easton Industrial Air offers engineering services. We work closely with clients in determining design requirements and problem definition for all their Mechanical HVAC needs. Design requirements assist in design of the process being developed and can include feasibility studies.
- Feasibility Studies – Purpose of a feasibility assessment is to have an evaluation of the potential of the proposed project and aid in decision-making. The project is assessed and based on an achievable idea that can be executed within cost constraints and proceed into the design phase.
- Conceptualization – This is the early phase of the design process in which the bigger picture of design is formed and articulated. This often leads into the next phase the FEED.
- Preliminary Design – This phase is also known as Front End Engineering Design and is the basic engineering, which comes after the conceptual phase. The FEED phase focuses on technical requirements as well as rough investment cost for the project.
- FEED Deliverables include:
- Updated Design Base Memorandum
- Project Schedules Level 1
- Cost Estimates (+/- 25%)
- Project Execution Strategy
- Permitting & Regulatory Compliance Plan
- PFD & PUD preliminary drawings
- Preliminary Sizing equipment & Specifications
- Detailed Engineering Design – Following FEED is the detailed engineering phase and in this phase design is refined and include 2D & 3D models, P&IDs, cost estimates, procurement plans. A spreadsheet below identifies full detailed deliverables per discipline & FEED.
- FEED Deliverables include:
Discipline | Deliverable/Activity | FEED | DETAIL |
General | Basic Engineering Design Data | ||
Safety | HAZOP/HAZID | X | X |
Hazardous area Classification | X | X | |
Fire Water demand calculation | Prelim | Final | |
Fire & Gas Detection layout | X | ||
Fire water network layout drawing | IFD | IFC | |
Safety Philosophy | X | X | |
Environment Impact Assessment | X | X | |
Process | Profess Flow Diagrams (PFDs) | X | X |
Heat & Material Balances | X | X | |
Equipment List | X | X | |
P&IDs | IFD | IFC | |
Process Description | X | X | |
Operating Manual | X | ||
Equipment Process Data Sheets | X | X | |
Instrument Process Data Sheets | Control Valves | ALL | |
Emergency shutdown philosophy | X | X | |
Causes & Effects Diagrams | X | X | |
Thermal Design & Data Sheets | X | X | |
Utility Balance | Prelim | Final | |
Flare Study | Relief Load | Final | |
Mechanical | Equipment Specifications | X | X |
Equipment mechanical design | X | X | |
Equipment Mechanical Data Sheet | X | X | |
Requisition for inquiry/purchase | Main Equipment | ALL | |
Technical Bid Tabulation | Main Equipment | ALL | |
Vendor Follow-up | X | ||
Plant Layout | General Plot Plan | X | X |
Unit Plot Plan | IFD | IFC | |
3D Model Review | Main Equipment | ALL | |
Piping Installation | Piping Route drawings | X | |
Piping Studies & Layout drawings | X | ||
Piping General Arrangement drawings | X | ||
Isometric drawings | X | ||
Piping/Material | General Specification for piping materials | X | X |
Piping classes summary | X | X | |
Material Selection & corrosion control | X | X | |
Special Piping Items Classification | X | ||
Standard Drawings | Design | Install | |
Piping MTO | P&IDs | Model | |
Piping/Stress | Design Specification for Stress | X | X |
Piping Stress Calculations | Critical Lines | X | |
Piping support drawings & List | X | ||
Instrumentation & Control | Control System specification | X | X |
Instrument data sheets | Control Valves | ALL | |
Instrumentation & Automation Design | X | X | |
System Architectural Drawing | X | X | |
System I/O sizing | X | X | |
Instrument List | X | X | |
Material Requisitions | X | ||
Material Take-Offs | X | ||
Cable Schedule | X | ||
Loop Diagrams | X | ||
Hook-Up Drawings | Standard | Assigned | |
Control & tech equipment arrangement | Prelim | Final | |
Cable routing drawings | Prelim | Final | |
Civil | Soil Investigation Specifications | X | X |
Underground Network drawings | General | Area | |
Design Specifications | X | X | |
Civil Works Specifications | Main | ALL | |
Guide/ outline drawings | X | ||
Design Drawings | X | ||
Calculations | X | ||
Drainage network calculation | X | X | |
Concrete/steel standard drawings | IFD | IFC | |
Building architectural drawings | X | X | |
Material Take-offs | Prelim | Final | |
Electrical | One line Diagram | Prelim | X |
Electrical Consumers list | General | Switchgear | |
Equipment General Specification | Prelim | Final | |
Electrical Design specification | X | X | |
Equipment data sheet | HV, MV | LV | |
Material Requisitions | X | ||
Standard Drawings | Design | Install | |
Specification for bulk | X | ||
Material Take-Offs | Prelim | Final | |
Cable Schedule | Prelim | Final | |
Substation Equipment Arrangement | Prelim | Final | |
Cable Routing Drawings | Prelim | Final | |
Calculations | Prelim | Final |